Disassembly Of Outdoor Unit; Disassembly Of 9,000 Btuh 240 Volt Outdoor Systems - Gree Neo GWH09MA-A3DNA3A Installation, Service & Troubleshooting

Warning - Wait 10 minutes after power is disconnected before starting disassembly.
1. Remove cable plate and valve cover
Remove screws attached to cable cross plate and
valve cover then remove them
2. Remove top cover
Remove screws connecting the top cover plate with
the front panel and the right side plate, and then
remove the top cover
3. Remove reactor sub-assy
Remove screws holding reactor sub-assembly and
then pull the reactor sub-assembly upwards to re-
move it. Remove screws on the reactor sub-assem-
bly cover and then remove the reactor

Disassembly of Outdoor Unit

9K 240 volt unit
171