Disassembly Of 115 Volt Indoor Units - Gree Neo GWH09MA-A3DNA3A Installation, Service & Troubleshooting

Warning - Wait 10 minutes after power is disconnected before starting disassembly.
1. Remove Panel
Open the front panel, push the rotor shaft on
both sides of the panel to make it separate from
the groove. Remove the panel.
2. Remove filter
Loosen the clasp of the filter, pushing the filter
inward and then lift it upward to remove.
3. Remove horizontal louver and front case.
Remove axial sleeve of horizontal louver. Bend
the louver outwards and then remove the louver.
Loosen the screws of the electric box cover 2, then
remove cover 2.
Open the screw cap on the front of the case, then
remove the screws holding the front case. Remove
the six clasps of the front case, then remove.
Disassembly of Neo Indoor Unit
115v model, Other models may vary slightly
161