Disassembly Of Neo Outdoor Unit; Disassembly Of 9,000 & 12,000 Btuh 120 Volt Outdoor Systems - Gree Neo GWH09MA-A3DNA3A Installation, Service & Troubleshooting

Warning - Wait 10 minutes after power is disconnected before starting disassembly.
1. Remove panel
Open the front panel. Push the rotor shaft on both
sides of the panel to make it separate from the
groove. Remove the panel.
2. Remove top cover
Remove connecting screws connecting the top cov-
er plate with the front panel and the right side plate,
and then remove the top cover.
3. Remove front grille
Remove connection screws between the front grille
and the front panel. Then remove the front grille.
164

Disassembly of Neo Outdoor Unit

115v model, Other models may vary slightly