Adjustment Of The Safety Partition; Emergency Release Of The Loading Area Door; Interior Lighting - Skoda Roomster Owner's Manual

Adjustment of the safety partition

Fig. 77 Top/lower support of the safety partition

First read and observe the introductory information and safety warn-
ings on page 73.
Only valid for some countries.
›
Raise the loading floor part behind the safety partition.
›
Undo and remove a bolt » Fig. 77
bolt » Fig. 77 -  in the lower area.
›
Move the safety partition into the required position. Ensure it is always move
the same distance- the same number of holes on both sides both upwards and
downwards.
›
On each side in the upper area of the body, undo and remove a bolt and undo
and remove a bolt in the lower area.
›
Have the tightening torque of the bolts checked with a torque wrench as soon
as possible. The tightening torque must be 20 Nm.
›
Change the position of the cover of the luggage compartment floor behind the
safety partition so that it lines up with the new position of the safety partition.
›
Fold back the loading floor part.
-  on either side in the upper body and one

Emergency release of the loading area door


First read and observe the introductory information and safety warn-
ings on page 73.
If there is a fault in the central locking, you can unlock the loading area door as
follows:
›
Pull the control cable towards you and pull on it.
›
Press on the loading area door to open it.
›
Press the control cable back again.

Interior lighting



First read and observe the introductory information and safety warn-
ings on page 73.
Switching on
›
Move the cover glass to the  position
Fig. 78
Emergency unlocking of the
loading area door
Fig. 79
Interior lighting
» Fig. 79.
Seats and stowing


75