Memory
First read and observe the introductory information and safety warn-
ings
on page 13.
The multifunction display is equipped with two automatic memories. The selected
memory is shown in the Display
» Fig.
The data of the single-trip memory (memory 1) is shown if a 1 appears in the dis-
play. A 2 shown in the display means that data relates to the total distance mem-
ory (memory 2).
Switch memories using button
» Fig. 5
B
stalk.
Single-trip memory (memory 1)
The single-trip memory collates the driving information from the moment the ig-
nition is switched on until it is switched off. New data will also flow into the cal-
culation of the current driving information if the trip is continued within 2 hours
after switching off the ignition. If the trip is interrupted for more than 2 hours,
the memory is automatically erased.
Total-trip memory (memory 2)
The total trip memory collates the data from any number of individual trips up to
a total of 19 hours and 59 minutes or 1999 km or, for vehicles with a MAXI DOT
display, 99 hours and 59 minutes, or 9999 km. The memory is deleted when ei-
ther of these limits is reached and the calculation starts all over again.
Unlike the single-trip memory, the total-trip memory is not deleted after a period
of interruption of driving of 2 hours.
14
Operation
Fig. 4
Multifunction display
4.
on page 14 on the windscreen wiper
Note
All information in the memory 1 and 2 is erased if the battery of the vehicle is dis-
connected.
Operation
First read and observe the introductory information and safety warn-
ings
on page 13.
The Toggle button for selecting menu items
on the wiper stalk.
Select menu items
›
Briefly press the top or bottom of rocker switch
vidual menu items in the multifunction display one after the other.
Select memory
›
Press button
» Fig.
5.
B
Reset memory
›
Select the desired memory.
›
Press and hold button
» Fig.
5.
B
The following values from the memory selected will be set to zero by button
›
Average fuel consumption.
›
Distance driven.
›
Average speed.
›
Driving time
Fig. 5
Multifunction display: Control el-
ements
» Fig. 5
and button
are found
A
B
» Fig.
5. This opens the indi-
A
.
B