›
Turn the connector with the bulb in counter-clockwise up to the stop and re-
move.
›
Replace the bulb, insert the holder with the new bulb and turn clockwise to the
stop.
›
To re-install the fog light, first of all place the fog light with the lug on the side
opposite the licence plate.
›
Press in the fog lamp on the side closest to the licence plate.
›
Insert the cap, beginning with the lug on the side opposite the license plate.
›
Press in the cap on the side facing the license plate. The cap must engage firm-
ly.
Fog light, Roomster Scout
Fig. 163 Front bumper: Fog lights/fog lights: Replacing the light bulb
Fig. 162
Front bumper: Roomster Scout
First read and observe the introductory information and safety warn-
ings
on page 194.
Removing the cap and fog light
›
Insert the tool
» page
180, Vehicle tool kit into the opening above the fog
light
» Fig. 162
and remove the cover.
›
Unscrew the screws
» Fig. 163
kit.
›
Remove the fog lamp.
Changing light bulbs and installing fog lights
›
Press the locking tab
» Fig. 163
1
tor from the bulb holder
.
B
›
Turn the bulb holder
and bulb in the direction of the arrow to the stop and
B
remove.
›
Replace the bulb, insert the bulb holder and new bulb and turn in the opposite
direction to that of the arrow to the stop.
›
Insert the plug
into the socket
A
›
Retighten the screws and insert the cap. The cap must engage firmly.
Replacing the bulb for the licence plate light
First read and observe the introductory information and safety warn-
ings
on page 194.
›
Open the tailgate and unscrew the glass cover
›
Remove the faulty bulb from the holder and insert a new one.
›
Replace the glass cover and push in until the stop. Make sure that you install
the rubber seal in the right direction.
›
Slightly screw the glass cover.
- with the screwdriver
» page
180, Vehicle tool
on the connector
and remove the connec-
A
.
B
Fig. 164
Remove the licence plate light
» Fig.
164.
Fuses and light bulbs
197