Skoda Roomster Owner's Manual page 92

Managing telephone calls with the help of the adapter
Fig. 86 Principle sketch: Adapter with one button/adapter with two buttons

First read and observe the introductory information given on page 86.
Function overview of the » Fig. 86

›
Switch on/off voice control;
›
Accept/end a call.
Some adapters include the button
SOS
After pressing this button for 2 seconds, the number 112 (Emergency call) is dial-
led.
Connecting the mobile phone to the hands-free system

First read and observe the introductory information given on page 86.
To connect a mobile phone with the hands-free system, the two devices must be
paired. Detailed information on this is provided in the operating instructions for
your mobile phone.
The following steps must be carried out for the connection.
®
1) Depending on the Bluetooth version on the mobile phone, an automatically generated 6-digit PIN is
either displayed or the PIN 1234 has to be entered manually.
2) Some mobile phones have a menu, in which the authorisation for establishing a Bluetooth
tion is completed by inputting a code. If the authorisation input is required, it must always be per-
formed when re-establishing the Bluetooth connection.
(PTT - "push to talk") button on the adapter:
» Fig. 86 in addition to the
A

›
Activate Bluetooth
›
Switch on the ignition.
›
Select the Phone - New user menu in the MAXI DOT display and wait until the
control unit has completed the search.
›
Select your mobile phone from the menu of the units found.
›
Confirm the PIN 1) .
›
If the hands-free system announces (as standard SKODA_BT) on the display of
the mobile phone, enter the PIN
tion is established
›
To finish pairing, confirm the creation of the new user profile in the MAXI DOT
display.
If there is no free space available to create a new user profile, delete an existing
user profile.
During the connecting procedure, no other mobile phone may be connected with
the hands-free system.
Up to four mobile phones can be paired with the hands-free system, whereby on-
ly one mobile phone can communicate with the hands-free system.
The visibility of the hands-free system is automatically switched off 3 minutes af-
ter the ignition is switched on and is also deactivated when the mobile phone has
connected to the hands-free system.
button.
Restoring the visibility of the hands-free system

If you have not managed to connect your mobile phone with the hands-free sys-
tem within 3 minutes of switching on the ignition, the visibility of the hands-free
system can be reestablished for 3 minutes in the following ways.
›
By turning the ignition off and on.
›
By turning voice control off and on.
›
In the Bluetooth - Visibility menu in the MAXI DOT display.
Creating a connection with an already paired mobile phone
After switching on the ignition, the connection is automatically established for
the already paired mobile phone
connection has been established.
®
connec-
®
and the visibility of your mobile phone on your telephone.
within 30 seconds and wait, until the connec-
1)
2) .
. Check on your mobile phone if the automatic
2)
Communication and multimedia

89