Configuring The Device To Use A Static Ip Address; Advanced Wi-Fi Settings - Motorola MC92N0-G User Manual

Configuring the Device to Use a Static IP Address

By default, the device is configured to use Dynamic Host Configuration Protocol (DHCP) to assign an Internet
protocol (IP) address when connecting to a wireless network. To configure the device to connect to a network using
a static IP address:
In the network dialog box, touch a network.
1.
Touch Show advanced options checkbox.
2.
Touch IP settings and select Static.
3.
Static IP Settings
Figure 3-34
In the IP address text box, enter an IP address for the device.
4.
If required, in the Gateway text box, enter a gateway address for the device.
5.
If required, in the Network prefix length text box, enter a the prefix length.
6.
If required, in the DNS 1 text box, enter a Domain Name System (DNS) address.
7.
If required, in the DNS 2 text box, enter a DNS address.
8.
Touch Connect.
9.
Touch .
10.

Advanced Wi-Fi Settings

NOTE Advanced Wi-Fi settings are for the device not for a specific wireless network.
Use the Advanced settings to configure additional Wi-Fi settings. From the Wi-Fi screen, touch
view the advanced settings.
Operating the MC92N0-G with Android OS 3 - 37
> Advanced to