Bluetooth Power States; Suspend; Resume - Motorola MC92N0-G User Manual

5 - 4 MC92N0-G User Guide

Bluetooth Power States

Table Table 5-3 list the state of the Bluetooth stacks after a warm or cold boot.
Bluetooth Power States
Table 5-3
After a
Warm Boot
Cold Boot

Suspend

When there is an active Bluetooth connection, the Bluetooth radio goes into low power mode maintaining the active
connection. When there is no active connection, the Bluetooth radio turns off.
With StoneStreet One Bluetooth Stack
If there is an active Bluetooth connection between the MC92N0-G and another Bluetooth device, the
NOTE
MC92N0-G will not timeout. However, if the user presses the Power button on the MC92N0-G, the
MC92N0-G will suspend and upon receiving data from a remote Bluetooth device, the MC92N0-G will wake
from suspend mode. For example, Bluetooth scanner sending data to the MC92N0-G.
With Microsoft Bluetooth Stack
NOTE If there is an active Bluetooth connection between the MC92N0-G and another Bluetooth device and there is
no data activity, the MC92N0-G will timeout. However, if the user presses the Power button on the
MC92N0-G, the MC92N0-G will suspend and upon receiving data from a remote Bluetooth device, the
MC92N0-G will wake from suspend mode. For example, headset redial or Bluetooth scanner sending data to
the MC92N0-G.

Resume

When the MC92N0-G resumes, Bluetooth turns on if it was on prior to suspend.
•
MotoBTUI Application
•
Use the MotoBTUI application to:
•
Turn the Bluetooth radio on and off. See
•
View device information.
•
Control device status
•
Generate a pairing bar code (See Using the RS507 Hands-free Imager on page 10-19 for more information).
•
Configure FIPS key.
Windows
Embedded
handheld Stone
Handheld
Street Bluetooth
Bluetooth Stack
Retains state Retains state
Retains state Retains state
Windows
Embedded Windows CE
Microsoft
Bluetooth Stack
Stack
Retains state
Does not retain state Does not retain state
Windows CE
Stone Street
Bluetooth Stack
Retains state