Available Services; Object Push Services Via Beam - Motorola MC92N0-G User Manual

5 - 8 MC92N0-G User Guide
Select a device from the list.
6.
Tap Next.
7.
NOTE If Smart-pairing is configured and the device is requesting one of the pre-defined PINs, the Enter
Passcode window does not appear.
Enter the Passcode on the other device. The device is added to the Bluetooth list.
8.
You are prompted to enter a passcode. If the device has a specific passcode, enter it in the Passcode field and
tap Next. If the device does not have a specific passcode, enter one in the Passcode field and tap Next. The
Bluetooth radio tries to connect with the device.
If you created a passcode, you will be prompted by the other device to enter the same passcode. Enter the
9.
created passcode to establish a paired connection. (If you entered a passcode from the device, you shouldn't
have to do anything on the other device.)
When the connection is complete, a list of matching and supported services on the device appears.
10.
Select the services you want to use and tap Finish. The services on the new devices have to be selected or
11.
else the pairing won't include those services, even though the devices are paired. If services are not selected,
you will be continually reprompted for the passcode from the device.
The device appears in the list on the main window.
12.
After the passcodes have been accepted on both sides, you have a trusted ("paired") connection.

Available Services

NOTE Some devices might not require a PIN. This depends upon the device's authentication.
The MC92N0-G with Microsoft Bluetooth stack and Windows Embedded Handheld offers the following services:
•
OBEX Object Push via Beam
•
Serial Port
•
Personal Area Networking
•
HID
•
Dial-up Networking
•
A2DP/AVRCP.
See the following sections for information on these services.

Object Push Services via Beam

NOTE You can only send files to a remote device using the Beam function.
Use the OBEX Push Service to send files and contacts to another Bluetooth device. To transfer files between the
MC92N0-G and another Bluetooth enabled device:
Ensure that Bluetooth is enabled and discoverable on both devices.
1.
Ensure that the two devices are within 30 feet (10 meters) of one another.
2.