Mc92N0-G Insertion And Removal - Motorola MC92N0-G User Manual

MC92N0-G Insertion and Removal

To insert the MC92N0-G into the fork lift cradle, place the bottom of the MC92N0-G into the bottom of the fork lift
cradle, then press the MC92N0-G back into the cradle until the release button locks it in place.
!
WARNING Ensure the bottom of the MC92N0-G is fully seated into the cup before you push the MC92N0-G into
the fork lift cradle. Failure to do so may cause property damage.
Ensure the MC92N0-G is fully inserted into the fork lift cradle and the release button is holding it
securely in place. Pull on the MC92N0-G to ensure it is secured properly. Improper insertion can
result in property damage or personal injury.
Do not use the product while driving.
Insert MC92N0-G into Forklift Cradle
Figure 7-21
To remove the MC92N0-G from the fork lift cradle, lift the release button, then lift the MC92N0-G from the cradle.
For one handed removal, use the index finger to press the release button up and then remove the MC92N0-G with
your thumb and other fingers.
Remove MC92N0-G from Forklift Cradle
Figure 7-22
Accessories 7 - 25