Universal Battery Charger (Ubc) Adapter; Inserting And Removing A Battery; Battery Charging Indicators - Motorola MC92N0-G User Manual

Hide thumbs Also See for MC92N0-G:
Table of Contents

Advertisement

Universal Battery Charger (UBC) Adapter

CAUTION
Ensure that you follow the guidelines for battery safety described in
This section describes how to use the UBC adapter to charge a spare battery.
The UBC can be used with a power supply as a standalone spare battery charger or it can be used with the four
station UBC2000 to provide charging to simultaneously charge up to four spare batteries. For additional
information about the UBC2000, see the UBC 2000 Universal Battery Charger Product Guide (p/n 70-33188-xx).
Battery Release
Battery Well
UBC Adapter
Figure 7-15

Inserting and Removing a Battery

Insert the battery into the battery well with the charging contacts facing down (over charging pins) and gently press
down on the battery to ensure proper contact.
To remove the battery, press the battery release and lift battery out of the well.

Battery Charging Indicators

To charge a spare battery using the UBC adapter, connect the power supply to the UBC, then insert the spare
battery. The spare battery begins charging automatically.
The UBC's charge LEDs (see
battery charging status indications.
The battery usually charges in three hours.
Battery
Figure
7-16) show the status of the battery charging in the adapter.
Battery Safety Guidelines on page
UBC Adapter
POWER
READY or STANDBY or FAULT
(Green)
(Flashing Yellow)
(Solid Yellow)
CHARGING
(Solid Yellow)
Accessories 7 - 19
8-1.
Table 7-2
shows

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents