Motorola MC32N0 SERIES Quick Start Manual

MC32N0 SERIES FEATURES
MC32N0-G
QUICK START GUIDE
Indicator LED Bar
Scan Button
Keypad
Strap Lanyard
Battery Release Button
Speaker
Headset Jack
MC32N0-S/R
Display
Display
Indicator LED Bar
Scan Button
Scan Indicator Keypad
Trigger
Power
Microphone
MC32N0-S
Back View
Headphone Jack
Stylus
Speaker
Stylus
Scan Button
Scan Button
Trigger
Speaker
Battery Release Button
Handstrap
Battery Release Button
GETTING STARTED
Receiver
Installing an Optional microSD Card
MC32N0-R
1. Remove the SD card cover using
Rotate Turret
stylus.
2. Slide the SD card holder down to
unlock.
3. Lift the SD card holder.
4. Place the microSD card into the
Scan Button contact area.
5. Close the SD card holder and slide
the SD card holder up to lock.
6. Replace the SD card cover and
ensure that it is installed properly.
MC32N0-R
Back View
1
Speaker
Stylus
2
Handstrap
Installing the Battery
1. On the MC32N0-R/S, loosen the
handstrap.
3
2. Align the top of the battery into the
battery compartment.
3. Rotate the bottom of the bottom
into the battery compartment.
4. Press the battery down until it
snaps into place.
5. On the MC32N0-R/S, tighten the
handstrap.
4
5
6
Charge the MC32N0
24hr*
Single Slot Cradle
1. Install battery adapter into
spare battery slot.
2. Install battery into adapter.
Four Slot Cradle
* It is recommended that this product be charged for 24 hours before the first use
to ensure that the internal battery is fully charged.