Motorola MC92N0-G User Manual page 202

B - 6 MC92N0-G User Guide
43-Key Keypad Descriptions
Table B-2
Key
Power (red)
Green/Red Dot
Scan (yellow)
Scroll Up and Down
Scroll Left and Right
ESC
SPACE/BKSP
Numeric/Alpha
Alpha/Application
Function (blue)
LED
Turns the MC92N0-G on and off.
Performs a warm boot and a cold boot. See
devices and Resetting the Android Device on page 3-15
about performing a warm and cold boot.
To use a key as an application key (APP key) on the keyboard, a new keyboard remap table must be created
and installed. However, the Green/Red dot keys can be remapped as APP keys through the registry.
Create an XML Provisioning file with the following entries:
Characteristic type ="HKEY_LOCAL_MACHINE\HARDWARE\DEVICEMAP\KEYBD"
Parm name = "GreenKeyOverride" value = "xx", where xx is the new APP key code.
Parm name = "RedKeyOverride" value = "xx", where xx is the new APP key code.
Refer to the MC92N0-G Integrator Guide for instruction on updating the registry using XML Provisioning.
This sends an APP key code, instead of their original key codes, when the green or red dot key is pressed.
Activates the scanner/imager in a scan enabled application.
Moves up and down from one item to another.
Increases/decreases specified values.
Moves left and right from one item to another.
Increases/decreases specified values.
Exits the current operation.
Space and backspace functions.
Number or alpha value depending on the state of the ALPHA key.
These keys can have an application assigned to the function value and have an alpha value assigned when
used with the ALPHA function key.
On Windows Embedded Handheld devices: F6 and F7 keys cannot be remapped and are dedicated by the
Operating System to control volume level. When these keys are pressed, Shell.exe traps them and displays
the volume adjustment window. To get these keys to an application, call GXOpenInput() at the beginning of
the application and call GXCloseInput() at the end of the application. This redirects all of the key events to an
application, including the F6 and F7 keys.
Note: Other applications cannot receive any key event until GXCloseInput() is called. For example, if the
customer is using the APP1 key to run Calc.exe, this is disabled during this period.
Press and release the blue function key to activate the keypad alternate functions (shown on the keypad in
blue). The LED above the key lights and the
Mobile and Windows CE devices and the
release the blue function key again to return to the normal keypad functions.
Description
Resetting the MC92N0-G on page 2-24
for Android devices
icon appears at the bottom of the screen on Windows
icon appears in the status bar on Android devices. Press and
for Windows
for information