L&R Analog Out Jacks; Digital In & Out Connectors; Digital In Jack (Rca); Digital Out Jack (Rca) - Marantz PMD570 User Manual

Back continued
2 3
R L
BALANCED IN ANALOG DIGITAL
GROUND
L
1
2
IN
3
I / O
HOT (+) COLD (-)
OUT
+ 24
+ 24
R
IN OUT (SPDIF)
R E F = + 1 6 d B u / 0 d B F S
2. ANALOG IN / OUT jacks continued
choice is flashing.
6. Turn the Jog Wheel so UnBal. is flashing.
7. Push and release the Jog Wheel to accept the
UnBal. choice.
8. Push and release the MENU/STORE button to
store the Menu change. Stored is displayed.
See page 24 for a full presentation of Menu
selection.
L & R ANALOG OUT jacks
ANALOG
Plug L and R RCA jacks in here to
L
connect to the Line level input jacks
of an external pre-amplifier, mixer
or recording device.
R
This connection will pass a line
IN OUT
level signal during recording, record
pause and playback.
3. DIGITAL IN & OUT
DIGITAL
connectors (SPDIF)
IN
Digital audio cable with RCA
jacks can be used for input and
OUT
output.
(SPDIF)

DIGITAL IN jack (RCA)

Connect a digital audio cable with an RCA jack from
an external device providing SPDIF digital output*.
To record from this input Dig-In must be selected
from the input menu.
*Incoming source must be at 44.1 or 48 kHz.
Example
display at
stop.
To select the DIGITAL IN jack as input for recording:
1. Push and release the MENU/STORE button.
2. Choose a Preset by turning the Jog Wheel.
3. Select the Preset by pushing and releasing the Jog
Wheel.
4. Turn the Jog Wheel so Input is flashing.
5. Push and release the Jog Wheel so the input choice
4 5
U L
US LISTED MODEL NO. PMD570
C
RS 232C

REMOTE2

REMOTE1
AC120V 60HZ 0.5A
AUDIO SYSTEM
69 FM
MADE IN JAPAN
S E R I A L N O .
C A U T I O N
RISK OF ELECTRIC SHOCK WARNING: SHOCK HAZARD- DO NOT OPEN.
DO NOT OPEN AVIS: RISQUE DE CHOC ELECTRIQUE-NE PAS OUVRIR.
TIME
L
REC REMAIN
-dB
00 40 20
R
is flashing.
6. Turn the Jog Wheel so Dig-In is flashing.
7. Push and release the Jog Wheel to accept the Dig-
In choice.
A C I N
8. Push and release the MENU/STORE button to
store the Menu change. Stored is displayed.
See page 24 for a full presentation of Menu
selection.

DIGITAL OUT jack (RCA)

Connect a digital audio cable with RCA jacks to an
external device accepting a SPDIF digital input. This
connection will pass a digital signal when the
PMD570 is recording, in record pause or during
playback.
I / O
To activate I/O:
From power off, push and hold the MENU/STORE
button while you power on by pushing and releasing
the POWER ON/OFF button.
The connection makes it easy to copy audio files to
your computer's hard drive. The I/O connection can
only be made active when the PMD570 is off (neither
recording or during playback).
See page 43 for a full discussion of the I/O connection.
REMOTE2
Model RC600 permits:
12 6 2 0 over
• starting recording
-dB
• pausing recording, and
• adding EDL marks
Model RC600 connects via a TRRS (Tip Ring Ring
Sleeve) connector.
- 22 -

4. I/O port

Plug an I/O cable in here and
connect the other end to your
computer (PC or MAC).
5. REMOTE 2
The REMOTE2 jack accepts the
optional wired remote Marantz
model RC600. Model RC600 has
a record indicator light.