Preset Defaults; General Menu Procedure; How To Select Input(S) For Recording; Input - Marantz PMD570 User Manual

Preset defaults

The default Menu settings for Presets 1, 2 and 3 can
be restored by the Default Menu choice, page 39.
Preset1 default uses the unbalanced (ANALOG IN
RCA jacks), line level, inputs. It is set for stereo
channel music recording with MP3 compression.
Selecting a higher bit rate (kbps) will improve audio
quality but decrease available recording time.
Preset2 default uses the unbalanced (ANALOG IN
RCA jacks), line level, inputs. It is set for Mono
channel recording with MP3 compression. The
settings are appropriate for recording meetings:
quality acceptable for voice recording, long recording
times possible, and capability to transfer files on
internet.
Preset3 default uses the balanced (BALANCED IN
XLR jacks) inputs. It is set for stereo channel CD
quality recording with no compression.
See chart below on page 24 for complete default
settings.
Note:
Setting any preset to default resets the main clock. We
recommend you set the date when you set a preset to
default. See page 26.

General Menu procedure:

1. With the PMD570 at Stop, push and release the
MENU/STORE button.
2. Turn the Jog Wheel to scroll to the choice within
Menu.
3. When displayed push and release the Jog Wheel to
select that Menu choice.
4. Turn the Jog Wheel to scroll through the sub-menu
displays.
5. When the desired parameter or value is displayed
push and release the Jog Wheel to select it.
6. Repeat steps 2-5 as desired.
7. When done push and release the MENU/STORE
button to save your changes, or push and release
the Stop CANCEL button

How to select input(s) for recording

Audio input(s) and audio channels for recording are
selected using the Input Menu.
1. From stop push and release the MENU/STORE
button.
to cancel them.
- 25 -
SOLID STATE RECORDER PMD570
POWER ON/OFF HEADPHONE LEVEL
0
10
2. Turn the Jog Wheel to select Preset1, 2 or 3.
3. Push and release the Jog Wheel to accept the
selected Preset.
4. Turn the Jog Wheel so Input is displayed and
flashing.
5. Push and release the Jog Wheel while Input is
displayed and flashing. The input choice (Bal.In,
UnBal., or Dig-In) is flashing.
Example
display
6. Turn the Jog Wheel to tab through the input
choices.
7. When correct push and release the Jog Wheel.
Display returns to Input flashing.
8. Turn the Jog Wheel to select other Menu choices
for editing. When editing the Preset is complete
push and release the MENU/STORE button to
accept the changes, or push and release the CAN-
CEL button to exit Menu mode without making
any changes.
Notes:
• The Bal.In and Unbal. input choices are line level
inputs. LINE is displayed on the stop and record
displays.
Example
display
• The PMD570 records only from the selected
input. For example if the input selected Bal.In and
no input source is connected to the XLR jacks the
PMD570 will record silence. Watch the level
meters while in record pause, if the level stays at
one display bar check for the proper input selec-
tion.
1 2
DISPLAY MENU/STORE
REC LEVEL/SELECT
TOTAL TRACKTIME A-B
L
REC REMAIN kbps
LOCK kHz -dB 00 40 20 1 6 2 0 over EDIT UNDO M. RESET
R 2
AM
PM
SHIFT S.SKIP -dB
TRACK
LINE
MARK
MARK CANCEL
TIME
L
REC REMAIN
-dB
00 20
40
R
LINE
LINE
PUSH
ENTER
MARK
REC BAL
12 0 over
6 2
-dB