Line Out Jacks - Marantz CDR420 User Manual

Controls, Connections (rear)
1 2 3 4
MIX LINE AUX DIGITAL
OUT OUT IN
R R IN
L L OUT
1 MIX OUT jacks
MIX
OUT Plug Right and Left RCA audio
cables in here to connect to the
R
input of a amplifi er or other exter-
nal unit. Use for recording onto
L
an external recorder.
Input from MIC/LINE (or INT
MIC) and/or AUX jacks are
output as line level output to an external recorder or
amplifi er. The signal is output before going to the HD/
CD drive, so it is available for monitoring or recording
even if recording is paused or stopped.
This signal cannot be equalized by the CDR420 tone
controls.
MIX LINE AUX
OUT
R
L
This signal can be equalized by the CDR420 tone
controls.
3 AUX IN jacks
AUX
Plug Right and Left RCA audio
IN
cables in here to connect to the
R
output of an external unit.
Use for recording from an external
L
audio source such as a cassette
deck.
5 6
I / 0 KEYB KEYB
DC IN
8 7

2 LINE OUT jacks

Plug Right and Left RCA
audio cables in here to
connect to the input of an
amplifi er or other external
unit.
DIGITAL
IN
OUT
I / 0
The HD on the CDR420 appears as an external hard
drive on your computer. That makes it easy to copy
audio fi les from the CDR420 HD to your computer's
hard drive or a CD, or from your computer's hard drive
to the CDR420. The I/O connection can only be made
active when the CDR420 is off (neither recording or
during playback).
6
KEYB
Plug your PS/2 computer keyboard
in here for direct input into the
CDR420.
See page 62 for details.
with a power supply suitable for your area. If you are
traveling or want battery power, see www.d-mpro.com
for available power supplies. Search for "CDR420 ac-
cessories."
8 DCIN pin out
EXT BATT(-)
1
1
DC IN (+)
2
2
DC IN (-)
3
3
4
EXT BATT(+)
4
- 26 -
4 DIGITAL IN and OUT jacks
(SPDIF)
Plug RCA coaxial cables in here to
connect to the input and/or output
of an external digital unit.
Use IN for recording from an exter-
nal 44.1 kHz digital audio source.
Use OUT for going to an external
digital device.
5 I/O jack (computer)
Plug a USB cable in here and
connect the other end to your
computer (PC or MAC).
KEYB jack (keyboard)
7 DC IN
DC IN
Plug the supplied power
supply into a wall outlet
and in here.
The CDR420 is shipped
1 External Battery -
2 DC IN +
3 DC IN -
4 External Battery +