How To Set Or Change The Recformat Parameters - Marantz PMD570 User Manual

How to set or change the RecFormat parameters

This table of RecFormat parameters reflects the menu
setting procedure of those parameters.
1 Bal.In, Unbal. or Dig-In
2 4
3
48
44.1
32
PCM
24
22.05
16
48
MP2
384,256,192,128,96,64
44.1
32
Stereo
48
320,256,160,128,80,64
44.1
32
MP3
24
320,256,160,128,80,64
22.05
16
48
44.1
32
PCM
24
22.05
16
48
MP2 44.1
32
Mono
48
44.1
160,128,80,64,40,32
32
MP3
24
22.05
16
First choose Bal.In or Unbal. (Col. 1) from the Input
menu choice (see page 25.)
1. From stop push and release the MENU/STORE
button.
2. Turn the Jog Wheel to select Preset1, 2 or 3.
3. Push and release the Jog Wheel to accept the
selected Preset.
4. Turn the Jog Wheel so RecFormat is displayed
and flashing.
5. While RecFormat is flashing push and release
the Jog Wheel. Channel information, Stereo or
5
- - - (1536)
- - - (1412)
.wav/
- - - (1024)
.bwf
- - - (768)
- - - (704)
- - - (512)
.mpg/
.bwf
.mp3/
.bwf
.mp3
- - - (768)
- - - (705.6)
- - - (512)
.wav/
- - - (384)
.bwf
- - - (352)
- - - (256)
.mpg/
192,128,96,64,48,32
.bwf
.mp3/
.bwf
.mp3
160,128,80,64,40,32
Mono, will be displayed and flashing. (Col. 2)
Example
display
6. While the channel information is flashing turn
the Jog Wheel to toggle between stereo and
6
7
mono. Push and release the Jog Wheel when
correct.
Example display
.wav/
shows change to
.bwf
mono.
.wav/
Note:
.bwf
The bitrate changed when the channel changed
to Mono.
.wav/
The stereo bitrate was 128 kbps, consisting of
.bwf
two channels at 64 kbps each. The change to
mono thus changed the bitrate to 64 kbps.
7. The compression algorithm will be flashing
(Col. 3).
.wav/
While the compression algorithm is flashing turn
.bwf
the Jog Wheel to tab between MP3, PCM, and
MP2. Push and release the Jog Wheel when
correct.
.wav/
.bwf
Example
display shows
.wav/
no change.
.bwf
8. The sampling frequency (kHz) will be flashing
(Col. 4).
While the sampling frequency is flashing turn
the Jog Wheel to tab through available sampling
frequency choices (available frequencies depend
on channel, and compression algorithm choice).
Push and release the Jog Wheel when correct.
Example display
shows change to
48.00 kHz.
9. The bitrate (kbps) will be flashing (Col. 5).
While the bitrate is flashing turn the Jog Wheel to
tab through available bitrate choices.
Example
display shows
change to 32
kbps.
Push and release the Jog Wheel when correct.
- 29 -
kbps
kHz
kbps
kHz
kbps
kHz
kbps
kHz
kbps
kHz
continues