Status; Maintenance - Panasonic KX-HDV130 Administrator's Manual

Maintenance

Menu Item
Provisioning
Maintenance
Firmware
Maintenance
Upgrade
Firmware
Export Logging
File
Reset to Defaults
Restart
*1 The access levels are abbreviated as follows:
U: User; A: Administrator
A check mark indicates that the setting is available for that access level.
*2 This setting can also be configured through other programming methods (phone user interface programming or configuration file
programming).
This setting can also be configured through configuration file programming.
*3

4.2 Status

This section provides detailed descriptions about all the settings classified under the [Status] tab.
Document Version 2015-02
Section Title
Provisioning
Maintenance
Firmware Maintenance
Upgrade Firmware
Export Logging File
Reset to Carrier Defaults
Restart
Setting
Standard File URL
*3
Product File URL
*3
Master File URL
*3
Cyclic Auto Resync
*3
Resync Interval
*3
Time Resync
*3
Header Value for Resync
Event
*3
Enable Firmware Update
Firmware File URL
*3
Firmware File URL
Logging File Type
The following settings will be
reset to carrier default values
when you click [Reset to
Carrier Defaults].
Click [Restart] to proceed.
Restarting will take a few
moments.
Access
Level
*1
U A
ü Page 153
ü Page 153
ü Page 153
ü Page 153
ü Page 153
ü Page 154
ü Page 154
ü Page 155
*3
ü Page 155
ü Page 156
ü Page 156
ü Page 156
ü Page 157
Administrator Guide
4.2 Status
Ref.
69