Co Status Display - Panasonic KX-WT125 Operating Instructions Manual

Before Operating the Handset

CO Status Display

The status of the Flexible CO Keys is displayed on the LCD and on the soft keys.
Displays the status of F-CO3 through F-CO8.
Pressing the Navigator Key
The left and right soft keys display the status of F-CO1 and
F-CO2.
Note
• Displaying the status of CO lines in standby mode must be enabled through PBX
settings.
• If this feature is not enabled in the PBX, either "–" or nothing is displayed in the
CO status line, and soft keys will not show the CO status in standby mode.
• The CO status line is not displayed if "Off" is selected for the "CO Status
Disp" setting in "Setting Handset".
• The left and right soft keys are ¿xed at F-CO1 and F-CO2, respectively.
24
lets you select an F-CO line.