5.3.3 Ethernet Port Settings
VLAN_PRI_PC
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_ENABLE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_INTERVAL
Value Format
Description
Value Range
Default Value
Web User Interface Reference
LLDP_VLAN_ID_PC
Value Format
Description
Value Range
Default Value
186
Administrator Guide
INTEGER
Specifies the priority number for the PC.
0–7
0
PC Priority (Page 85)
BOOLEAN
Specifies whether to enable or disable the LLDP-MED feature.
Note
•
You should specify "Y" for only one of "LLDP_ENABLE", or
"VLAN_ENABLE". If "Y" is specified for two or more of the
parameters above, the settings are prioritized as follows:
VLAN_ENABLE >LLDP_ENABLE. Therefore, if "Y" is specified
for both "VLAN_ENABLE" and "LLDP_ENABLE", the
VLAN-related settings are used.
•
Y: Enable LLDP-MED
•
N: Disable
Y
Enable LLDP (Page 83)
INTEGER
Specifies the interval, in seconds, between sending each LLDP frame.
1–3600
30
Packet Interval (Page 83)
INTEGER
Specifies the VLAN ID for the PC when LLDP is on.
0–4094
0
Document Version 2015-02