5.3 System Settings
5.3.1 System Settings
FACTORY_RESET_ENABLE
Value Format
Description
Value Range
Default Value
5.3.2 Basic Network Settings
IP_ADDR_MODE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
CONNECTION_TYPE
Value Format
Description
Value Range
Default Value
Web User Interface Reference
STATIC_IP_ADDRESS
Value Format
Document Version 2015-02
BOOLEAN
Specifies whether to enable or disable the operation of factory default
and carrier default.
•
Y: Enable factory reset operation
•
N: Disable
Y
INTEGER
Specifies the IP addressing mode.
•
0: IPv4
•
1: IPv6
•
2: IPv4&IPv6
0
IP Addressing Mode (Page 77)
INTEGER
Specifies whether to assign the IP address automatically (DHCP) or
manually (static) for IPv4.
•
0: Static
•
1: DHCP
1
Connection Mode (Page 77)
IPADDR
5.3.2 Basic Network Settings
Administrator Guide
179