Adjust Picture And Sound Settings - Bang & Olufsen BeoVision 7 Manual

Picture and sound settings are
preset from the factory to neutral
values which suit most viewing
and listening situations. However,
if you wish, you can adjust these
settings to your liking.
Adjust picture brightness, contrast
or colour. Sound settings include
volume, bass and treble.
Store your picture and sound
settings temporarily – until your
television is switched off – or
store them permanently.
Activate GAME MODE if you
connect a game console to your
television.
For information about how to
change the picture format,
see Getting Started.

Adjust picture and sound settings

Adjust brightness, colour or contrast
Adjust the picture settings via the
PICTURE menu. Temporary settings
are cancelled when you switch off the
television.
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight PICTURE.
> Press the centre button to bring up the
PICTURE menu.
> Use the navigation button up or down to
move through menu items.
> Use the navigation button left or right to
adjust the values.
> Press BACK to store your settings until
you switch off the television, or
> ... press the centre button to store your
settings permanently.
For video sources using the VGA signal, the
following options appear as well:
HOR. SIZE ... Adjusts the picture size along
the horizontal axis.
VERT. SIZE ... Adjusts the picture size along
the vertical axis.
HOR. POSITION ... Adjusts the picture
position along the horizontal axis.
VERT. POSITION ... Adjusts the picture
position along the vertical axis.
Note that these four settings only apply for
the screen resolution in effect at the time
you adjust the settings.
To temporarily remove the picture from the
screen, press to bring up the Scene
display on Beo5, press Picture, then press
P.Mute. To restore the picture, press
P.Mute again. (Beo4: press LIST and use the
navigation button up or down to bring up
P.MUTE in the Beo4 display and press the
centre button. To restore the picture, press
a source button.)
32
PICTURE
BRIGHTNESS
CONTRAST
COLOUR
TINT
SIZE
GAME MODE
When signals are sent in format 1080p or
1080i, the menu item SIZE is available in the
PICTURE menu.
For video sources using the NTSC signal, the
menu item TINT is available.
You cannot adjust brightness or contrast
when using a projector connected to the
television, or when using the television in
Home cinema mode.
.... . . . .
.... . . . .
.... . . . .
.... . . . .
.... . . . .