Bang & Olufsen BeoVision 7 Manual page 54

Use the Beo4 remote control
If you have a Beo4 remote control, some
functions are available directly via Beo4
when you switch on the equipment.
Additional functions are available
through a menu-overlay that you bring
up on the screen. In this menu you can
see which Beo4 buttons activate specific
services or functions.
Your Bang & Olufsen retailer can provide
you with a 'show mapping' survey which
explains operation of the connected
equipment with Beo4 in more detail.
> Press a source button, for example
V.MEM, to switch on connected
equipment.
> Press MENU to bring up the menu-overlay.
> Press the number button that activates the
function you want, or press one of the
coloured buttons to activate a function.
The menu-overlay for equipment connected
to a main room television cannot be displayed
on the television screen in the link room.
However, you can still access the different
features if you press LIST and use the
navigation button up or down to bring up
SHIFT and then select a number or colour.
>> Operate other equipment with Beo5 or Beo4
Direct Beo4 operation
If you know which Beo4 button activates
the function you want, you can activate
the function without bringing up the
menu-overlay first.
While your equipment is on ...
> Press one of the coloured buttons to
activate a function.
> Press and hold the centre button to bring
up the Program Guide or the 'Now/Next'
banner on the screen if you are using
equipment that supports these functions.
> Press MENU and use the number buttons
to activate the function you want.
> Use and to step between channels*.
> Use and to rewind and wind in, for
example, recordings*.
*This operation does not apply to Beo4
without navigation button.
On some connected equipment you have to
press LIST and use the navigation button up
or down to bring up SHIFT and press 9 to
switch the equipment on and off, and on
some you have to press PLAY then 0.
54
PROGRAM GUIDE
RADIO/TV MODE
MENU
INFORMATION
PROGRAM GROUPS 1
SUBTITLE LANGUAGE 2
AUDIO LANGUAGE 3
SETUP 4
PROGRAM LIST 5
Example of a menu-overlay. The Beo4
buttons are shown to the right on the menu,
and the functions they control are shown to
the left. The menu may also list buttons on
the remote control included with your
connected equipment.