Your Television In A Link Room - Bang & Olufsen BeoVision 7 Manual

If you have BeoLink installed in
your home and you choose to
place your television in a link
room, you can operate all
connected systems through the
television.
You must follow the procedure
described below when you connect
your television for use in a link room:
1 Connect the link room television to
the mains
2 Using your remote control,
programme the link room
television to the correct Option
3 Disconnect the link room television
from the mains
4 Make the necessary connections
5 Reconnect the link room television
to the mains.

Your television in a link room

Option setting
For your entire system to function
properly, it is essential that the
television in the link room is set to the
correct Option before you connect it to
the television in the main room!
With Beo5 ...
> Place yourself in front of the link room
television.
> While holding the • button, press the
centre button to bring up the SETUP
menu on Beo5.
> Let go of both buttons.
> Press Option Pgm to bring up the Option
Programming display on Beo5.
> Press the button that matches the zone in
which the television is placed.
With Beo4 ...
> While holding the • button, press LIST on
Beo4.
> Let go of both buttons.
> Press LIST and use the navigation button
up or down to bring up OPTION? in the
Beo4 display and press the centre button.
> Press LIST and use the navigation button
up or down to bring up V.OPT in the Beo4
display and press 6*.
60
Main room
Link room
'Zone XX'
(Option 6)
*If you connect the television for use in a link
room where other link systems are already
connected, such as speakers, you must set
the television to Option 5 instead.