Connections - Bang & Olufsen BeoVision 7 Manual

The connection panel on your
television allows you to connect
signal input cables as well as a
variety of extra equipment, such
as a video recorder or a linked
Bang & Olufsen music system.
Any equipment you connect to
these sockets must be registered
in the CONNECTIONS menu. For
further information, see page 15.
Before you connect any equipment
to your television, remember to
disconnect the television from the
mains.

Connections

DVB-S
DVB-T/C
ANALOGUE
HDR
AV 1
[V.MEM]
Digital TV
AV 2
[DTV2]
AV 5
BeoMaster
MASTER LINK
[PC]
VGA
Camera
AV 6
[CAMERA]
There are some restrictions as to the types of
equipment that can be connected to the
sockets.
Equipment with VGA output can only be
connected and registered to the AV5 and
AV6 sockets.
11
POWER LINK 1
SUB
POWER
LINK
2–6
Loudspeakers
Use Bang & Olufsen Power Link speakers.
Use the cables enclosed with the speakers.
Cables are available from your Bang &
Olufsen retailer.
Equipment with HDMI™ input
Equipment with HDMI output such as a set-
top box can be connected to any available
HDMI socket in the TV, regardless of the
particular AV socket group to which you
have connected the equipment. To distribute
the source to another room you must also
connect the equipment to a 21-pin socket or
AV3 video input socket on the connection
panel. For more information on how to set
up connected equipment for use, see page 15.