Bang & Olufsen BeoVision 7 Manual page 17

>> Register additional video equipment
Standby settings ...
When you register a non-Bang & Olufsen
product in the CONNECTIONS menu, you
can also select different STANDBY OPTIONS
for your product. This means that you can
select if the connected product should
switch to standby automatically.
The options are:
OFF AT SOURCE CHANGE ... The product
switches to standby immediately when
you select another source.
OFF AT TV STANDBY ... The product
switches to standby when you switch the
television to standby.
ALWAYS ON ... The product does not switch
to standby automatically.
MANUAL CONTROL ... The product can be
switched on and off by means of the
remote control. For further information
see page 55.
17