Auto Standby - Bang & Olufsen BeoVision 7 Manual

>> Set the television to switch itself on or off

Auto standby

The television can be set to switch itself
to standby after some time with no
operation. The factory setting is 4 hours.
This function only applies in video mode
not in audio mode.
To activate the auto standby ...
> Bring up the TV SETUP menu and highlight
OPTIONS.
> Press the centre button to bring up the
OPTIONS menu and highlight AUTO
STANDBY.
> Press the centre button to bring up the
AUTO STANDBY menu.
> Use the navigation button up or down to
select the setting you want.
> Press the centre button to store the setting.
> Press BACK to back up through previous
menus or press and hold BACK to exit all
menus.
When you have activated the function, a
message appears on your television screen if
the television has not been operated during
the time set in the menu. The television then
switches to standby, if you do not operate it.
40
AUTO STANDBY
AFTER 1 HOUR
AFTER 2 HOURS
AFTER 4 HOURS
OFF
AUTO STANDBY menu.