Adjust Picture And Sound Settings - Bang & Olufsen BeoVision 8 User Manual

42
Picture and sound settings are preset
from the factory to neutral values
which suit most viewing and listening
situations. However, if you wish, you
can adjust these settings to your
liking.
Adjust picture brightness, colour or
contrast. Sound settings include
volume, bass and treble.
Store your picture and sound settings
temporarily – until your television is
switched off – or store them
permanently.
For information about how to change
the picture format, refer page 9.

Adjust picture and sound settings

Change brightness, colour or contrast
Adjust the picture settings via the PICTURE
menu. Temporary settings are cancelled
when you switch off the television.
> Press TV to switch on the television.
> Press MENU to bring up the TV SETUP menu
to highlight PICTURE.
and press
> Press GO to bring up the PICTURE menu.
> Press or to move through menu items.
> Press or to adjust the values.
> Press EXIT to store your settings until you
switch off the television, or ...
> ... press GO to store your settings permanently.
To temporarily remove the picture from the screen,
press LIST repeatedly to display P.MUTE on Beo4,
then press GO. To restore the picture again, press
any source button, such as TV.
PICTURE
.
....... .......
BRIGHTNESS
.
....... .......
CONTRAST
.
....... .......
COLOUR
.
....... .......
TINT
.
....... .......
SIZE
select
When signals are sent in format 1080p or 1080i,
the menu item SIZE is available in the picture
menu.
What's on the PICTURE menu ...
BRIGHTNESS ... Adjusts the picture brightness.
CONTRAST ... Adjusts the contrast level in the
picture.
COLOUR ... Adjusts the colour intensity in the
picture.
(SIZE) ... If you experience any irregularities along
the edges of the picture, select SIZE and adjust.
If a source, such as a PC, is connected via the VGA
socket, the following options appear:
HOR. SIZE ... Adjusts the width of the picture.
VERT. SIZE ... Adjusts the height of the picture.
HOR. POSITION ... Adjusts the position of the
picture horisontally.
VERT. POSITION ... Adjusts the position of the
picture vertically.
For video sources using the NTSC signal, a further
option – Tint (colour shade or nuance) – will be
available for adjustment.
GO