Navigate In Menus - Bang & Olufsen BeoVision 7 Manual

Navigate in menus

Beo5
If you operate your television with the
Beo5 remote control, you use the centre
button with up, down, left and right
movement to navigate in menus. Press
in the middle of the centre button to
confirm selections and settings in menus.
Bring up the TV SETUP menu by pressing
Menu while the TV is on.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
Beo4 with navigation button
If you have a Beo4 remote control with
navigation button and your television is
set up for use with it, see page 48, you
use the centre button with up, down,
left and right movement to navigate in
menus. Press in the middle of the centre
button to confirm selections and
settings in menus.
Bring up the TV SETUP menu by pressing
MENU while the TV is on. If you have
selected a source which has a menu
overlay, you must press MENU twice to
bring up the TV SETUP menu.
Beo4 without navigation button
If you have a Beo4 remote control without
navigation button, you must use the
'star' to navigate up, down, left and
right in menus and press the centre
GO
button to confirm choices and settings
in menus.
Bring up the TV SETUP menu by pressing
MENU while the TV is on. If you have
selected a source which has a menu
If your Beo5 is set up to be used without
navigation button, press STOP to back up
through menus and BACK to exit menus.
Note that a Beo5 should be reconfigured
when you add new products to your setup.
To back up through menus, press BACK.
To exit menus, press and hold BACK.
If your television is set up for use without
navigation button, you must use the 'star'
to navigate up, down, left and right in
menus and press the centre button to
confirm selections and settings in menus.
To back up through menus, press STOP.
To exit menus, press BACK.
overlay, you must press MENU twice to
bring up the TV SETUP menu.
To back up through menus, press STOP.
To exit menus, press EXIT.
5