Sony SRW-9000 Operation Manual page 197

SMPTE-292M (embedded audio×12)
Output connectors
EARPHONES
Mini-jack (stereo)
TEST OUT
BNC (switchable)
HD Y/SD composite (character on/off)
HD SDI MON1, HD SDI MON2
BNC×2
HD-SDI: SMPTE 292M (embedded
audio, timecode, character on/off)
HD SDI OUT A/B (optional)
BNC×2 (when the optional HKSR-9001
is installed)
HD-SDI 1.5G Single Link: SMPTE
292M (embedded audio, timecode)
HD-SDI 1.5G Dual Link: SMPTE 372M
(embedded audio, timecode)
HD-SDI 3G Single Link: SMPTE 424M
(embedded audio, timecode)
TC OUT
BNC, 1.0 Vp-p, 75Ω
DC OUT
4-pin, (for wireless microphone
receiver), 11 to 17 V DC (MAX 0.5 A)
Input/Output connector
LENS 12-pin
REMOTE
8-pin
EXT I/O
5-pin
CTRL (CAM)
CTRL (VTR)
Supplied Accessories
Operation Manual (1)
Lens mount cap (1)
V-shoe plate (1)
V-shoe plate attachment screws (K4×8, 6)
Cable holder (1)
Control panel cable (L) (1)
Optional Accessories
See "Example System Configuration" (page 13).
Design and specifications are subject to change
without notice.
Notes
• Always make a test recording, and verify that
it was recorded successfully.
SONY WILL NOT BE LIABLE FOR
DAMAGES OF ANY KIND INCLUDING,
BUT NOT LIMITED TO, COMPENSATION
OR REIMBURSEMENT ON ACCOUNT OF
FAILURE OF THIS UNIT OR ITS
RECORDING MEDIA, EXTERNAL
STORAGE SYSTEMS OR ANY OTHER
MEDIA OR STORAGE SYSTEMS TO
RECORD CONTENT OF ANY TYPE.
• Always verify that the unit is operating
properly before use. SONY WILL NOT BE
LIABLE FOR DAMAGES OF ANY KIND
INCLUDING, BUT NOT LIMITED TO,
COMPENSATION OR REIMBURSEMENT
ON ACCOUNT OF THE LOSS OF
PRESENT OR PROSPECTIVE PROFITS
DUE TO FAILURE OF THIS UNIT, EITHER
DURING THE WARRANTY PERIOD OR
AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER
REASON WHATSOEVER.
Specifications 197