Lip Sync Compensation - Sony SRW-9000 Operation Manual
Hide thumbs
Also See for SRW-9000:
- Operation manual (221 pages) ,
- Brochure & specs (8 pages) ,
- Operation manual (177 pages)
Table of Contents
Advertisement
Lip Sync Compensation
Compensation (Lip Sync compensation) for the
delay of video relative to audio may be necessary,
depending on the video format and system
configuration.
Amount of delay of video relative to
audio
The amount of delay of video relative to audio
depends the video format and the status of the
image-inversion (IMAGE INVERT) function
(see page 73) as follows:
Unit: frames
Video format
IMAGE INVERT
OFF
ON
59.94i
0.5
1
50i
0.5
1
59.94P
1
2
50P
1
2
29.97PsF
2
3
25PsF
2
3
23.98PsF
2
3
Systems on which compensation is
performed automatically
The unit’s input module performs delay
compensation automatically when a microphone
is connected to an AUDIO IN connector, and
when multiplexed audio is input to the AUX IN
connector.
Also, when timecode input to the TC IN or AUX
IN connector is regenerated, timecode generator
compensation is performed. In this case, a delay
of 0.5 frames is handled as 0 frames.
Systems on which compensation must be
performed manually
When you have connected this unit to an SRW-1
+ SRPC-1, and wish to record on the SRW-1
using a microphone connected to the AUDIO
INPUT CH1 to CH4 connectors of the SRW-1 +
SRPC-1, perform lip sync compensation
manually.
Adjust the amount of compensation on the SRW-
1 side, according to the amount of delay described
above.
If you input timecode to the TC IN connector of
the SRW-1, timecode compensation must also be
performed in the same way.
Page 198
Advertisement
Table of Contents
