Relation Between Playback And Recording Signals And Video Monitor Output Signals - Sony SRW-9000 Operation Manual

A bar appears for formats that cannot be
used. A yellow check mark appears for
formats that can be used, and the current
format flashes.
4
Move the cursor to the format you want
to use.
To move the cursor left and right
Turn the SELECT/ENTER dial.
To move the cursor up and down
Turn the SELECT/ENTER dial with the
FUNC button held down.
Relation between Playback and Recording Signals and Video Monitor
Output Signals
During recording and playback of HD SDI signals, signals in the formats shown in the following table are
output to the video monitors connected to the HD SDI MON1 and HD SDI MON2 connectors.
Recording/playback
signal
1080/4:2:2
1080/4:4:4SQ
1080/4:4:4HQ
(when the optional
HKSR-9003 is installed)
For the case of SR Motion shooting, see "Target
Frame Frequencies and Signal Formats" (page 98).
To check the signals output to the video
monitors
With the FUNC button on the control panel held
down, press the HOME button.
The display at the bottom of the HOME screen
changes to show the formats of the signals
currently being output to the HD and SD video
monitors.
HD monitor
Output
23.98PsF 1080/4:2:2
24PsF
25PsF
29.97PsF
50i
59.94i
50P
59.94P
23.98PsF
24PsF
25PsF
29.97PsF
50i
59.94i
5
Press the SELECT/ENTER dial.
"CANCEL" and "OK" appear at the bottom
of the screen.
To change the "SELECT FPS" setting, move
the cursor and press the ENTER button while
holding the FUNC button down.
6
Move the cursor to "OK", and then
press the SELECT/ENTER dial.
A message appears to inform you that the
format has been selected, and you return to
the HOME screen.
23.98PsF
24PsF
25PsF
29.97PsF
50i
59.94i
50i
59.94i
23.98PsF
24PsF
25PsF
29.97PsF
50i
59.94i
Detailed Video Format Settings
SD monitor
Output
525/59.94i
625/50i
625/50i
525/59.94i
625/50i
525/59.94i
625/50i
525/59.94i
525/59.94i
625/50i
625/50i
525/59.94i
625/50i
525/59.94i
77