Connecting An Audio Multiplexer (Mux) To The Aux In Connector (When Using The Hksr-9001) - Sony SRW-9000 Operation Manual

1 To AUDIO IN CH-1 or CH-2 connector
2 Audio equipment
3 Input selection switches
Connecting an Audio Multiplexer
(MUX) to the AUX IN Connector
(When Using the HKSR-9001)
You can multiplex audio signals into HDSDI
signals and input them to the AUX IN connector
when using the AJA HD10AMA Analog Audio
Embedder/Disembedder, HKSP-105 HD AV
Multiplexer Board, and HD VTRs such as the
SRW-1/SRPC-1.
Multiplexing into the HDSDI output
signals of this unit
Set REFERENCE on the <GENLOCK page> of
the Camera >MAINTENANCE menu to
INTERNAL or GENLOCK IN.
a)
HDSDI
input
Audio input
a) 75Ω coaxial cable
b) The HD SDI MON2 connector and the HD
SDI MON1 connector on the side panel can
also be used.
To use the HD-SDI OUT A connector: Set GL-
MODE on the <Genlock> page.
To use the HD-SDI MON1/2 connectors: Set
GL-MODE on the <Genlock> page.
Multiplexing into external HDSDI signals
Set REFERENCE on the <GENLOCK> page of
the Camera >MAINTENANCE menu to AUX
IN.
Connecting Audio Input
a)
HDSDI
output
33