Viewing Settings And Indications In The Viewfinder; Viewing The Basic Status - Sony SRW-9000 Operation Manual

HD-BAR (VF/MON)
You can select the formats of the color bar signals
sent to the VF, HD SDI MON1 and HD SDI
MON2 connectors from among 17 types.
SD-BAR
You can select the formats of the color bar signals
to the TEST OUT and REMOTE connectors from
among five types.
Item Selectable color-bar formats
HD-BAR BAR 16:9 (100%), BAR 16:9
(VF/MON) (75%), SMPTE 16:9 (BLACK)
BAR 4:3 (100%), BAR 4:3 (75%),
SMPTE 4:3 (BLACK), MF-ARIB
(75%), MF-ARIB (100%), MF-
ARIB (+I), MF-SMPTE (–I, Q)
SD-BAR SMPTE, EIA, FULL (EBU), 95%,
NTSC100% (PAL100%)
Note
The color bar signal is not output with the video output
from the VF, HD SDI MON1, HD SDI MON2, and
REMOTE connectors if the monitor LUT (R709) is
selected for MLUT/PBMIX of the respective output on
the <PB/MON LUT> page (except when a VBS signal is
output).
Viewing Settings and
Indications in the
Viewfinder
In addition to the video, the viewfinder can
display text and messages showing the settings
and operating status of the unit.
The same information can be displayed on the
monitors connected to the HD SDI MON1 and
HD SDI MON2 connectors.
Note
This information is not displayed when the unit is in
menu operation mode. Exit menu operation mode to
view the information.

Viewing the Basic Status

The following status indications can be
superimposed on the camera picture. They appear
when you press the VF MENU/DISPLAY button.
The display conditions can be specified on the
<VF DISPLAY> page of the Camera >USER
(OPERATION) menu.
a Frame rate
The current frame rate is displayed.
b Lens extender
"EX" is displayed when a lens extender is in use.
c Recording mode
"REC" is displayed when the recorder docked on
the camera is in REC mode.
d Battery indication
Indicates the input power voltage.

Viewing Settings and Indications in the Viewfinder

59