Acl > Cpu Filter Finder; Acl > Acl Flow Meter - D-Link DGS-1210/ME User Manual

4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
2) Select the field of interest and related columns will be displayed in lower part of the page. Enter the
filtering mask and click Create when done. A filtering mask is to specify the digit that you want to check. For
example, if you want to check a network of 192.168.1.0/24, then you should enter the IP mask as
255.255.255.0.
3) After the Profile ID has been created, it will go back to the main CPU Filter Access Profile List page.
ACL > CPU Filter Finder
The CPU Filter Finder page is used to help user to find a previously configured CPU entry. To search for an
entry, enter the Profile ID from the drop-down menu, select a port that you wish to view and click Find. The
table on the lower half of the screen will display the entries. To delete an entry click the corresponding
Delete button.
Figure 4.184 - ACL > CPU Filter Finder
ACL > ACL Flow Meter
ACL Flow Metering table is a per flow bandwidth control used to limit the bandwidth of the ingress traffic.
When the users create an ACL rule to filter packets, a metering rule can be created to associate with this
ACL rule to limit traffic. The step of bandwidth is 64kbps. Dut to limited metering rules, not all ACL rules can
associate with a metering rule.
Figure 4.185 - ACL > ACL Flow Meter
Profile ID: The pre-configured Profile ID for which to configure the Flow Metering parameter.
Access ID (1-250): The pre-configured Access ID for which to configure the Flow Metering parameters.
Enter the appropriate information and click Find the entries will be displayed on the lower half of the table.
To edit and entry click the corresponding Modify button, to delete an entry click the corresponding Delete
button, to add a new entry click the Add button which will display the following window for the user to
configure.
Figure 4.186 - ACL > Add ACL Flow Meter
108