Acl > Cpu Filter Access Profile List - D-Link DGS-1210/ME User Manual

4 Configuration
Deny - Drops packets if all other CPU Filter criteria is met.
Press Apply for the settings to take effect.
ACL > CPU Filter Access Profile List
The CPU Filter Access Profile List provides information for configuring CPU Profiles manually. CPU Filter
Access profiles are attached to interfaces, and define how packets are forwarded if they match the CPU
Filter criteria.
The contents of CPU Filter Access Profile List table include:
Profile ID: Indicates the profile Identification number. The possible configured profile IDs are 1~50, and
profile ID 51 is reserved for Voice VLAN.
Owner Type: The owner type of CPU Filter profile, it can be normal CPU Filter, Voice VLAN, Surveillance
VLAN or ARP Spoofing Protection.
Profile Summary: Displays the profile summary.
Show Details: To display a CPU Filter's profile details. The CPU Filter profile details are displayed below the
CPU Filter table.
Edit/New Rules: To configure or add the CPU access rule in this profile.
To add a new rule, please see Add CPU Filter Profile in the next section.
Delete All: To delete all access profile.
To manually add a profile, click Add CPU Filter Profile.
The steps of adding a CPU Filter profile is like below:
1) After selecting the Profile ID and Frame Type (MAC, IPv4 or IPv6), specify attributes like
Untagged/Tagged (for MAC), or ICMP/IGMP/TCP/UDP/Protocol ID (for IPv4), or Traffic Class (for IPv6), then
click Select and a simplified frame diagram will be displayed.
Figure 4.182 - ACL > CPU Filter Access Profile List
Figure 4.183 - ACL > CPU Filter Access Profile List -Add CPU Filter Profile
DGS-1210 series Metro Ethernet Managed Switch User Manual
1 0 7
1 0 7