Security > 802.1X > 802.1X Guest Vlan; Security > Mac Address Table > Static Mac - D-Link DGS-1210/ME User Manual

Metro ethernet switch series
Hide thumbs Also See for DGS-1210/ME:
Table of Contents

Advertisement

4 Configuration
DGS-1210 series Metro Ethernet Managed Switch User Manual
Confirm Key: Confirm the shared key is the same as that of the RADIUS server.
Click Apply to implement configuration changes.
Security > 802.1X > 802.1X Guest VLAN
The 802.1X Guest VLAN page allows user to set a Guest VLAN, and the user must first configure a normal
VLAN which can be enabled here for Guest VLAN status.
Enter the pre-configured VLAN name to create as a Guest 802.1X VLAN and select the port or ports. Click
Apply to implement the settings.
Figure 4.124 - Security > 802.1X > 802.1X Guest VLAN
Security > MAC Address Table > Static MAC
This feature provides two distinct functions. The Disable Auto Learning table allows turning off the function
of learning MAC address automatically, if a port isn't specified as an uplink port (for example, connects to a
DHCP Server or Gateway). By default, this feature is Off (disabled).
Figure 4.125 - Security > MAC Address Table > Static Mac Address
To initiate the removal of auto-learning for any of the uplink ports, click On to enable this feature, and then
select the port(s) for auto learning to be disabled.
The Static MAC Address List table displays the static MAC addresses connected, as well as the VID. Click
Add Mac to add a new MAC address, you also need to select the assigned Port number, enter both the Mac
Address and VID and Click Apply. Click Delete to remove one entry or click Delete all to clear the list. You
can also copy a learned MAC address from Dynamic Forwarding Table (please refer to Security > MAC
Address Table > Dynamic Forwarding Table for details).
By disabling Auto Learning capability and specify the static MAC addresses, the network is protected from
potential threats like hackers because traffic from illegal MAC addresses will not be forwarded by the Switch.
Click Add MAC button, select the Port, VID and enter the MAC address then click Apply to add a new MAC
address.
7
3
7
3

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents