Din Rear-Mount (Method B) - AEG CS FMP 550IR Owner's Manual

Removing the unit
1.Make sure the ignition is turned off, then disconnect the cable from the
vehicle battery's negative (-) terminal.
2.Remove the metal strap attached the back of the unit (if attached).
3.Press the release button to remove the front panel.
4.Lift the top of the outer trim ring then pull it out to remove it.
5.Insert both of the supplied keys into the slots at the middle left and right
sides of the unit, then pull the unit out of the dashboard.

DIN REAR-MOUNT (Method B)

If your vehicle is a Nissan, Toyota, follow these mounting instructions.Use
the screw holes marked T (Toyota), N (Nissan) located on both sides of the
unit to fasten the unit to the factory radiomounting brackets supplied with
your vehicle.
7