AUTOMATIC MEMORY STORING &PROGRAM SCANNING
- Automatic memory storing
Press AMS button (18) for several seconds, the radio searches from the
current frequency and checks the signal strength until one cycle search is
finished. And then 6 strongest stations are stored into the corresponding
preset number button.
- Program scanning
Press AMS button (18) shortly to scan preset station, When the field
strength level is more than the threshold level of stop level, the radio is
holding at that preset number for several seconds with release mute, then
Press any one of the preset buttons (14) (1 to 6) to select a station, which
had been stored in the memory. Press this button for several seconds (until
2ND beeps come out), current stationis stored into the number button.
RDS (RADIO DATA SYSTEM) OPERATION
- Setting RDS mode
Press AF/REG button (3) and release immediately to switch on or off RDS
mode. Whenever RDS is switch on, symbol AF appears on the display.
Program name is displayed on receiving a RDS station.
AF starts blinking if the broadcasting signal getting worse.
ALARM will be displayed when an emergency broadcasting is received,
meanwhile sound output level will be adjusted to the preset output level
automatically when the volume
- Regional Program Operation
Press AF button (3) for several seconds to switch on or off region mode.
Some broadcasting stations change their program from normal
broadcasting to regional broadcasting for a certain time period.
When region is on, the current listening program remains unchanged.
When region is off, it allows the reception moves to the regional station.
- Using PTY to Select Program PTY button (1) is operated as follows:
control is set at minimum.