Hyundai WS 2005 Instruction Manual page 45

8. THERMOMETER
8.1 RF Transmission Procedure:
• The main unit automatically starts receiving transmission from outdoor thermo sensor for
outdoor temperature after weather condition setting.
• The thermo sensor unit will automatically transmit signal to the main unit after batteries
inserted. For having more than one external transmitter (Maximum3), select the Channel,
CH1, CH2 or CH3 to ensure each sensor is transmitting difference channel before inserting
batteries. The channel select switch (D8) is at the back of the thermo sensor.
• If main unit failed to receive transmission from outdoor thermo sensor in first 3 minutes after
the batteries inserted ("- - . –" display on the LCD), hold "Channel" button (B10) for 3 seconds
to receive transmission manually. RF icon "
Note: "WEATHER/HISTROY" (B5), "+/C/F" (B6), "-"(B7), "ABSOLUTE/RELATIVE" (B8),
&"MAX/MIN" (B13) buttons will not function while scanning for thermo sensor's signal unless
they are well received or stopped manually.
8.2 Temperature & Humidity
(1) Outdoor Temperature --- Channel Selection
• Press "CHANNEL" button (B10) to view the 3 Channels' temperature & humidity.
The sequence is shown as follow:
PRESS "CHANNEL" button  PRESS "CHANNEL" button  PRESS "CHANNEL" button
1
CH
• When viewing the record on CHANNEL 1 or 2, or 3, hold "CHANNEL" button (B10)
for 3 seconds to cancel the record on this channel manually, and receive the transmission
automatically again.
(2) Maximum / Minimum Temperature and Humidity
• Press "MAX/MIN" button (B13) to show the maximum recorded Indoor /Outdoor Temperature
and Humidity. "MAX" is shown on the LCD
• Press "MAX/MIN" button again to show the minimum recorded Indoor/Outdoor Temperature
and Humidity. "MIN" is shown on the LCD.
• Hold "MAX/MIN" button (B13) for 3 seconds to clear the recorded maximum and minimum
reading.
" flashes on the LCD
2
CH
EN - 45
3
CH
channels alternatively
EN
Display the three