Outdoor Thermo Sensor; Getting Started; Installation - Hyundai WS 2005 Instruction Manual

3. OUTDOOR THERMO SENSOR

D1: Transmission Indication LED
D2: Outdoor Temperature display
D3: Outdoor Humidity display
D4: Battery Compartment
D5: Wall Mount Hole

4. GETTING STARTED:

4.1 Main Unit:
• Slide open main unit battery compartment cover [C2]
• Insert 3 x AA batteries observing polarity [ "+" and " –" marks]
• Replace main unit battery compartment cover [C2]
• Use a pin to press the RESET [B9] button on the rear of the main unit, the main unit is now
ready for use
4.2 Outdoor Thermo Sensor
• Batteries compartment (D4) of thermo sensor is locating behind the back cover,
unscrews the batteries cover to open.
• Insert 2 x AAA batteries observing polarity [ "+" and "–" marks]

5. INSTALLATION

5.1 Main Unit
The main unit can be placed onto any flat surface (C3), or wall mounted by the hanging hole
(C1) at the back of the unit.
5.2 Outdoor Thermo sensor
The remote sensor should be securely mounted onto a horizontal surface.
Note: Transmissions between receiver and transmitter can reach up to 30m in open area.
Open Area: there are no interfering obstacles such as buildings, trees, vehicles, high voltage
lines, etc.
D6: "RESET" button
D7: "C/F" button
D8: Channel Select Switch
D9: Temperature Probe Plug & Jack
D10: Stand
EN - 42