Time And Alarm Setting - Hyundai WS 2005 Instruction Manual

(3) Outdoor Temperature Trend
• The trend pointer (A22) displayed on the LCD indicates the trend of the outdoor temperature.
Indicating the outdoor temp. is
rising
(4) Outdoor Humidity Trend
• The trend pointer (A23) displayed on the LCD indicates the trend of the outdoor humidity.
Indicating the outdoor
humidity is rising
(5) Celsius/Fahrenheit
• Press "°C/°F" button (B6) to select Indoor/Outdoor Temperature in Celsius mode
or Fahrenheit mode.
• If the temperature is out of the measurable range, LL.L (beyond the minimum temperature) or
HH.H (beyond the maximum temperature) will be shown on the LCD.
(6) Comfort Indicator Bar
if the black dot in green zone means pleasant climate.
(7) The use of 1.5m cord Temperature Probe:
• Insert the probe plug (D9) to the jack on the right hand side of the Thermo Sensor Unit.
• Put the metal casing outside and leave the Thermo Sensor Unit in indoor area to avoid
freezing up the battery when the outdoor temperature is below -20 °C.
• Always use the temperature probe to sense the temperature when the temperature is
between the following range: -50 °C ~ 0°C and +50°C ~ + 70°C

9. TIME AND ALARM SETTING

9.1 Radio Controlled Clock:
• At 3 minutes after the start-up of the unit, the clock automatically starts to scan the DCF time
signal. Radio Control Icon "
(A2) flashes,
Indicating now is receiving
DCF signal
Indicating the outdoor temp. is
steady
Indicating the outdoor
humidity is steady
(A18) for the display of pleasant/unpleasant climate,
" (A2) flashes on LCD.
(A2) turns on,
Indicating signal received
successfully
EN - 46
Indicating the outdoor temp. is
falling
Indicating the outdoor
humidity down
(A2) disappear,
Indicating signal reception
failed