Ethernet Connector; Integrated System Management Connector; Serial Connector - IBM Eserver xSeries 335 Type 8676 Hardware Maintenance Manual And Troubleshooting Manual

connector.

Ethernet connector

The following illustration shows the dual Ethernet connector.
Ethernet 1 port
activity LED
Connect a Category 3, 4, or 5 unshielded twisted-pair cable to this connector. The
100BASE-TX and 1000BASE-T Fast Ethernet standards require Category 5 or
higher cabling.
For more information about the Ethernet controller, see "Configuring the Gigabit
Ethernet controller" on page 19.

Integrated system management connector

Use this connector to connect an optional Remote Supervisor Adapter. See "Cabling
the server" on page 63 for information about using a Remote Supervisor Adapter to
manage servers on an ASM interconnect network. The following illustration shows
an integrated system management connector.

Serial connector

Use a serial connector to connect a serial device. The following illustration shows a
serial connector.
5 1
15 11
8
1
8 1
5
1
6 9
Ethernet 2 port
activity LED
1
8
Chapter 4. Customer replaceable units
71