Software: Simplify3D - Mass Portal Pharaoh ED User Manual

Move Model:
Ctrl-left-click and
drag
Scale Model:
Ctrl-right-click and
drag up or down
Rotate Model:
Alt-left-click and drag
right or left
Layer height: the
height of each layer
for the 3D printed
object, it should be
between 0.01-0.3
mm.
26
MP Delta Manual ENG +.indd 26

Software: Simplify3D

Interface Layout
1. Build Table: This is the interactive 3D environment where you
will be viewing and working with your 3D content before printing.
This is the "main stage" and primary viewing area.
The gray grid is scaled proportionally to the size of your build
volume and is determined based on your printer selection with
the Configuration Assistant.
2. Menu Bar: Primary navigation to all aspects of Simplify3D
Software.
3. Models: When you import 3D models, they are listed in this
section above the buttons/commands that enables you to work
with your models.
4. Processes: The build operations to create your 3D print are
listed here, along with buttons/ commands enabling you to work
with process functions.
5. Toolbar: This toolbar contains quick access buttons for
frequently used tools.
You can move the toolbar anywhere you wish by clicking and
dragging the top dotted line.
The first four buttons
are preset
viewing positions,
allowing you to quickly
change to the default,
top, front, or side view.
15/04/15 17:03