Mass Portal Pharaoh ED User Manual page 22

TIP Fan speed
percentage is
estimated, and fans
will not work all
the way down to 0
percent.
22
MP Delta Manual ENG +.indd 22
USING THE PRINTER CONTROL PANEL — CONTINUED
Fan Speed menu
Use to set the speed of the three part cooling fans.
Remember to turn off fans for the first couple of layers, so the
bounced airflow form the printbed does not cool the nozzle.
Fan Speed : 100%
Turn Fan Off
Set Fan 25%
Set Fan 50%
Set Fan 75%
Set Fan Full
Bed Coating menu
Use to select the printbed coating that you use.
This must be set correctly for the automatic calibration system to
work reliably.
Custom bed coating can be specified: eneter the height of the
coating in mm.
After selecting an option, a confirmation will be displayed.
>No Coating
Kapton
Blue Paper Tape
Green PET Tape
Glue Stick
Custom : 0.00mm
Bed coating set to
No Coating
15/04/15 17:03