Mass Portal Pharaoh ED User Manual page 32

Fit Printer (Strg+A):
Zooms to fit the
complete printer area
into the window with
maximum size.
Fit Objects (F5):
Zooms to fit all
objects into the
window with
maximum size.
Show Edges (Strg+E):
Toggles display of
triangulation edges.
Show Faces (Strg+F):
Toggles display of
triangulation faces.
Show Compass
(Alt+C): Toggles
display of coordinate
compass at the left
bottom.
You can find more
about G-Code at
http://reprap.org/
wiki/G-code;
32
MP Delta Manual ENG +.indd 32
REPETIER-HOST — CONTINUED
The extruder and print bed
This blocks allow it to change the temperature. The temperature
can be set either on the right in the text field as well as by
clicking on the temperature curve. If you change it in the text
field, you need to press return or leave the field to set the value.
By clicking the extruder or bed icon the extruder or the bed is
deactivated or reactivated.
First print
Your first model is loaded in preview block you can see the
estimated time how long it will take to print an object, from how
many layers it will consist and also aproximatly how much filliment
it will use during the print.
15/04/15 17:03