Mass Portal Pharaoh ED User Manual page 33

REPETIER-HOST — CONTINUED
Object parametrs
In this block you can export all displayed objects at once, add
objects in .stl, .obj, .amf and .3ds format, duplicate the marked
object(s) as many times as you want, center the marked object in
the center of the bed.
Scaling functon.
If the lock is closed, all axes are changed simultaneously. If you
click on the lock to unlock, you can adjust each axis separately
and the object may be distorted. A click on "Scale to Maximum"
enlarges the object so that it has the maximum printable size.
When you have been settled you can start your print, sit back
and wait for your first print to be finished.
Wait a few minutes after finishing , let the print cooldown, before
taking it of the heating plate.
MP Delta Manual ENG +.indd 33
You can select
one object by right
clicking on it. If you
press the ctrl-key
while right clicking
the selected object
is added. ctrl-clicking
a selected object
removes it from the
selection.
Note: You can view
description of each
function just by
hovering cursor
over it.
33
15/04/15 17:03