Software: Simplify3D - Mass Portal Pharaoh XD Series User Manual

WARNING The "Bed
Leveling Wizard"
does not work with
the Pharaoh® printer.
Do not try using it, it
could damage the
printer.
INFO The settings
in Simplify3D for the
Pharaoh ED will work
for the Pharaoh XD
as well.
28

Software: Simplify3D

Downloading process for Simplify3D:
1. Find the Redemption Card you received with your printer
2. Go to the website found inside the card, Simplify3D.com/
redeem
3. Fill in the information and redeem the code
4. Follow the downloading instructions
Setup
1. After you complete the installation of Simplify3D, please choose
the "Mass Portal Pharaoh ED" from the printer models pop-up
menu.
2. Click "Next" and complete the initial setup process.
3. For MP30 and MP40, when Simplify3D is open select
File>Preferences> Machine Tab and input the following
information for your printer:
For MP30:
For MP40: X and Y Build volume: 280, Z Build Volume: 400
X and Y Origin offset: 140, Z Orgin offset: 0
4. Click "Ok" and the setup is complete