Making Connections - Canon 3370 Series Service Manual

5.4.5 Making Connections

LBP3370
Connect the PC to the machine.
[Making Preparations]
Items to Prepare
- PC to which SSTv3.34 or higher and LBP3370 firmware have been installed
- USB cable (USB1.1,USB2.0)
[Procedure]
1) Start up the PC.
2) Connect the machine and the PCB with a USB cable.
4) Turn on the main power as follows to start download mode.
1. While holding down on the Online key (1) and the cancel job key (2), turn on the power.
2. Press the settings key (3) several times; when 'SERVICE MODE' is indicated, press the reset key (4) to start service mode.
3. Press the setttings key (3) several times; when 'F/W UPDATE GR' is indicated, press the reset key (4).
4. Press the setttings key (3) several times; when 'USB' is indicated, press the reset key (4).
5. When 'OK?' is indicated, press the OK key (5) to start download mode.
Service Support Tool DLM0 (Ver.3.34E)
Registerd Firms
CONTROL
Registered fir mware
LBP3370
CONT
XXenv0103
XXxxv0102
Found Firm
C l i c k a b u t t o n t o exe c u t e .
CONNECT
R e g i s t e r F i r m wa r e
D e l e t e F i r m wa r e
D e l e t e B a ck u p D a t a
S y s t e m M a n a g e m e n t
O K
CANCEL
EXIT
F-5-11
USB cable
F-5-12
F i r m wa r e r e g i s t ra t i o n c o m p l e t e d .
> > > B a t c h R e g i s t ra t i o n R e s u l t s
LBP3370
CONT
XXenv0103 >>> Regist
XXxxv0102
Chapter 5
0018-3180
5-9